Custom

Patch Panel OEM Supplier

Steady & Reliable Manufacturer

What a Patch Panel Is and Who Buys It

A patch panel is the rack-mounted termination field that brings every horizontal cable run in a telecom room back to one organized, labeled point, so a technician can cross-connect or re-patch a port without ever touching the permanent cabling behind the wall. Each port on the front is wired on the back to a punch-down block — 110, Krone, or dual-type IDC depending on the model — and the category of that termination (Cat5e, Cat6, Cat6A, or a blank frame for a custom keystone fit-out) determines what bandwidth the finished link can carry. For a network, the patch panel is what turns a bundle of individually run cables into a serviceable system: moves, adds, and changes happen at the front of the rack instead of inside the wall.

Simante produces patch panels across 1U, 2U, 24-port, and 48-port formats, in UTP and shielded FTP construction, in fixed-category (Cat5e/Cat6/Cat6A) and blank/angled versions that accept a customer's own keystone jacks. Buyers reaching this page as an OEM Patch Panel Supplier search are generally one of a few types: importers and brand owners who want their own part numbers and box graphics on a panel line instead of a generic one, distributors who need a dependable, repeat-order category range, data center and system integrators sourcing by the rack elevation, and project contractors who need a specific port count and shielding type matched to a cabling schedule. Simante has produced structured cabling and fiber components since 2005 and ships to 45+ countries, which is the backing most of these buyers are actually checking for before they commit to a private-label order.

Product Catalog

Core Specification

Patch panel specification differs from a passive jack mainly in rack format, port density, and termination style on the back, since the front-facing port itself still follows the same category standard. The table below lists the parameters Simante's current patch panel range is built around, drawn from its 1U/2U, 24-port/48-port, UTP/FTP, and blank/fixed-category models.

Because blank panels are sold to be populated with a customer's own keystone jacks, their 'category' spec is effectively set by whatever jack is punched into them — this is one of the more common OEM combinations requested: a Simante blank panel paired with a Simante-branded keystone jack line.

ParameterDetail
Category optionsCat5e, Cat6, Cat6A (fixed-category panels); Voice/25-port Cat3 panel also available
Panel format1U 24-port, 2U 48-port; 12-port and 0.5U compact formats also produced
Frame typeFixed-category keystone panel, blank/angled panel for customer-supplied keystone jacks
Termination type110 IDC, Krone IDC, and dual-compatible termination on the rear
ShieldingUTP (unshielded) and FTP (360° shielded shell) construction
Port orientationStraight (180°) and angled (90°) port layouts
Frame materialCold-rolled steel frame with powder-coated or plated finish
Wiring schemeT568A / T568B compatible, labeled on the panel face or rear
Performance referenceCategory electrical performance tested against TIA/EIA-568-C.2 and ISO/IEC 11801

Application Scenarios and Target Customers

Patch panels sold under this tag span standard office and campus telecom rooms running Cat5e/Cat6, data center and high-density server rooms specifying shielded Cat6A, and legacy or hospitality voice risers using the 25-port voice/Cat3 panel. Blank and angled panels are typically specified where a project's keystone jack mix is decided separately from the panel order — common on jobs with mixed voice and data drops, or where a customer wants every port on a panel to carry its own branded jack.

The table below sets out which customer type this page is written for and what each one is usually optimizing for when sourcing patch panels from an OEM factory rather than a generic trading company.

Customer TypeWhat They Typically Need
Importers & brand ownersPrivate-labeled panel face printing, consistent port-to-port electrical performance, direct factory pricing
Regional distributorsA full Cat5e/Cat6/Cat6A range kept in stock with predictable reorder lead times
Data center / system integratorsShielded Cat6A panels, high port density per rack unit, cable-management-friendly rear layout
Hotel & project contractorsVoice/25-port panels for guest-room risers alongside data panels for office areas, matched to the project's cabling schedule
Chain retailers / e-commerce sellersRetail-ready packaging and labeling for small-box or marketplace resale
Brand owners developing a custom panelBlank/angled panel frames that accept the customer's own branded keystone jack line, plus custom face printing

OEM/ODM Customization Capability

Simante's customization process for patch panels follows the same company-wide OEM/ODM workflow used across its product range: a design draft or reference sample is submitted, Simante produces a 3D drawing for confirmation, quotes the project, builds tooling if a new frame shape is needed, produces a physical sample for sign-off, and then moves into mass production with ERP-tracked order status. For a patch panel specifically, most customization requests fall into frame finish, port labeling, and category/termination mix rather than a brand-new mechanical design, since the rack-mount dimensions themselves follow a fixed industry standard.

The table below separates what can usually be adjusted on existing tooling from what requires a new mold or frame design, which is treated as a tooling-development project with its own lead time.

Customization ItemWhat Can Be Adjusted
Logo / face printingCustom logo, part number, and port-numbering silkscreen on the panel faceplate
Frame finishStandard plated/powder-coated steel; custom finish color on request
Port category mixFixed Cat5e / Cat6 / Cat6A, or blank frame populated with customer-selected keystone jacks
Termination style110 IDC, Krone IDC, or dual-compatible rear termination
ShieldingUTP or FTP (360° shielded) construction
Packaging & labelingCustom-printed carton, barcode/label, and multilingual instruction or wiring diagram sheet
New frame/mold developmentCustom rack-mount frame shape or bracket design built from the customer's drawing or sample; quoted separately

Production Capacity and Lead Time

Simante was established in 2005 and operates two manufacturing plants totaling more than 9,000 square meters, with over 50 precision production units — including 10 automatic and 20 semi-automatic injection molding machines plus 8 automatic installation machines — supported by 10+ engineers and 30+ full-time technical staff and an in-house testing laboratory. Company-wide annual output is stated at more than 9 million units, exported to 45+ countries and regions across Europe, Australia, Africa, the Middle East, and Southeast Asia.

These figures describe Simante's overall manufacturing base and are a useful reference for assessing order-size capacity. Standard lead time, peak-season lead time, and MOQ for a specific patch panel SKU depend on port count, category, shielding, and customization scope, and should be confirmed directly with Simante's sales team.

ItemDetail
Established2005 — 20+ years in network cabling and fiber optic component manufacturing
Facility9,000 m²+ total factory area across two manufacturing plants
Equipment50+ precision production units, incl. 10 automatic + 20 semi-automatic injection molding machines and 8 automatic installation machines
Technical team10+ engineers, 30+ full-time technical staff, in-house testing laboratory
Annual output9 million+ units per year across the product range
Export footprint45+ countries and regions across Europe, Australia, Africa, the Middle East, and Southeast Asia
Standard lead timeConfirm with Simante sales — quoted per port count, category, and shielding option
Peak-season lead timeConfirm with Simante sales — typically longer during seasonal peak periods
MOQConfirm with Simante sales — varies by panel format and customization scope

Packaging and Logistics

Simante's factory sits in Yuyao, Ningbo City, Zhejiang Province, roughly 50 km from Ningbo-Zhoushan Port, which keeps sea-freight handling straightforward for both standard and OEM-packaged panel orders. Patch panels are typically individually boxed with corner or edge protection given their rack-mount frame, then packed into export cartons; under OEM/ODM service the inner box, outer carton printing, and included labeling or instruction sheet can all be customized to the buyer's brand.

Exact carton dimensions, units per carton, and container loading counts vary with port count and panel format (1U vs. 2U, for example), so these are confirmed as part of the formal quotation. The fields below describe the categories of information Simante provides at that stage rather than fixed figures.

ItemDetail
Nearest portApprox. 50 km from Ningbo-Zhoushan Port
Standard export packagingIndividually boxed panel with corner/edge protection, packed into export cartons; custom box printing available under OEM/ODM
Carton specificationConfirmed per SKU — varies by 1U/2U format and port count
Units per cartonConfirmed per SKU at quotation stage
Container loading (20GP/40HQ)Provided with the formal quotation once carton specification is set
Common trade termsFOB Ningbo, CIF, and EXW commonly used; other Incoterms negotiable
Shipping modesSea freight for bulk/project orders; air or express courier for samples and urgent restocks
Since 2005

Yuyao Simante Network Communication Equipment Co., Ltd.

Yuyao Simante Network Communication Equipment Co., Ltd. offer complete network cabling solutions and optical fiber products integrating design, development, sales and service. The factory has 10 regular and customization production lines, fully automatic injection molding machine 10 sets, semi-automatic injection molding machine 20 units, all kinds of automatic installed machine 8 units, maintaining the stable annual output of more than 9 million.

We specialize in network cabling solutions and optical fiber products integrating design, development, sales and service.
 
Based on the mature research and development system, the quality stability of Simante has been guaranteed at the design source. We have more than 10 engineers and over 30 full-time technical persons who continue to provide their professional value in the position, improving quality and promoting product update. Simante provides specialized integrated solutions for customers to ensure it meets the customer's requirement. Welcome to visit.

17+ Industry Experience
Simante factory
Simante workshop

Our main products include keystone jacks,patch panels, wall face plates, data sockets, etc., and are widely used in structured cabling, network communication, smart home and automation equipment, and other fields. The factory has 10 regular and customization production lines, fully automatic injection molding machine 10 sets, semi-automatic injection molding machine 20 units, all kinds of automatic installed machine 8 units, maintaining the stable annual output of more than 9 million.
 
It is precisely because we are based on the high-end market that Simante has higher requirements for product quality. Not only strictly manage the production, but also meet customers' comprehensive testing requirements for products through good performance testing. We maintain stable export volume in Europe, Australia, Africa, the Middle East and Southeast Asia, and also undertake OEM and ODM projects.
 
Simante, help you create value together!

Work with Loyal

We strive to develop our R&D capabilities and manufacture and provide more cost-effective products to meet your market needs.

  • Product quality assurance

  • Customized solutions

  • Innovative product design

  • Responsible service

Get a Free Quote

Name* Email* Company Your Message*
Recommended Links: Patch Panels Patch Cord OEM Factory High-Density Patch Panel Systems Fiber Optic Patch Panel 24 Port Patch Panel 48 Port Patch Panel Patch Cords Fiber Optic Patch Panel Manufacturer

Contact Us

*We respect your confidentiality and all information are protected.