Custom

Keystone Jacks & Modules

Steady & Reliable Manufacturer

Introduction

Keystone jacks are small modular connectors that snap into a standard keystone opening found on wall plates, patch panels, and surface mount boxes. Instead of wiring a fixed connector directly into a plate, a keystone jack lets the installer terminate the cable to a removable module, which can be swapped or upgraded later without rewiring the entire outlet.

Modules are available for RJ45 data connections, RJ11 telephone lines, coaxial, HDMI, USB pass-through, and fiber optic adapters, all sharing the same standardized keystone footprint. This allows a single wall plate or patch panel to combine several media types side by side within one uniform opening layout.

Because the keystone format is shared across so many connector types and plate styles, it has become a common building block in structured cabling design rather than a single fixed product. A designer can specify the plate and panel layout first, then choose which modules to populate based on what each outlet actually needs to carry, which keeps the installation flexible as requirements change during or after construction.

Material and Build Quality

Module housings are generally molded from flame-retardant plastic to withstand repeated handling during installation and later maintenance, while internal contacts use gold plating to resist oxidation and maintain stable conductivity over the life of the connection. Buyers comparing modules from different sources often check the termination cap design and contact spacing, since modules that feel loose in the keystone opening or require excessive force to seat can indicate inconsistent molding tolerances.

Product Catalog

Physical Specifications

Type RJ45 (Cat5e/Cat6/Cat6a), RJ11, coaxial, fiber, HDMI, USB
Housing Material High-impact flame-retardant plastic
Color Options White, black, ivory, or custom on request
Compatibility Standard keystone cutout, fits most wall plates and panels
Cable Entry Rear cable entry with strain relief clip
Dust Cover Optional protective shutter for unused ports
Packaging Bulk pack or individual retail-ready packaging

Performance Specifications

Termination Method 110-type punch down or tool-free push-in
Shielding Unshielded (UTP) or shielded (STP/FTP) versions available
Contact Material Gold-plated contacts for stable signal transfer
Insertion Cycles Rated for repeated patch cord insertion and removal
Certification Support Designed to meet Category rating of installed module
Wiring Scheme Support T568A/T568B compatible termination layout
Operating Environment Suited to standard indoor structured cabling conditions

Application

Keystone jacks and modules are used anywhere a flexible, mix-and-match termination point is needed, including:

  • Residential and commercial wall outlet installations
  • Modular high-density patch panel systems
  • Structured cabling upgrades where media types may change over time
  • Surface mount boxes in retrofit or exposed conduit installations
  • Data centers requiring mixed copper and fiber termination points
  • Conference rooms and AV setups combining data, HDMI, and USB in one plate
  • Hospitality and multi-dwelling projects standardizing outlet layouts
  • Educational campus buildings mixing voice, data, and video drops

Common Module and Plate Combinations

Setting Typical Module Mix
Home office outlet One or two RJ45 data modules
Meeting room plate RJ45 data module plus HDMI and USB pass-through
Telecom demarcation point RJ11 voice modules alongside RJ45 data modules
Data center cross-connect RJ45 and fiber keystone modules on the same panel

Design Considerations Before Ordering

  • Confirm the plate or panel opening follows standard keystone dimensions before mixing modules from different sources
  • Decide between tool-free push-in and 110-type punch down based on installer familiarity and available tools
  • Reserve spare keystone slots during initial installation for anticipated future media types
  • Match shielded modules with shielded cable and grounded hardware for consistent interference protection
  • Standardize on one module brand and termination method per project where possible to simplify field technician training

Advantages

The main value of the keystone format is the flexibility it gives installers and facility managers over the life of the cabling system, not just at the point of initial installation.

  • Modularity allows a single wall plate or panel to support multiple cable types without custom fabrication
  • Damaged or outdated modules can be replaced individually instead of rewiring the outlet
  • Consistent footprint across brands and plate styles simplifies stock management
  • Supports a mix of copper, fiber, and audio-video connections in one location
  • Faster on-site termination compared with hard-wired connector installations
  • Reduces waste during upgrades, since only the module needs replacing, not the plate or panel
  • Simplifies inventory planning, since one module type can serve many plate layouts
  • Allows phased installation, with unused keystone slots filled later as needs grow

Keystone Jack vs Fixed Connector Outlet

Factor Fixed Connector Outlet Keystone Jack System
Upgrade path Requires replacing the whole outlet Swap only the affected module
Media flexibility Limited to the connector installed Mixes data, voice, AV, and fiber freely
Repair scope Rewiring often needed for a fault Single module replacement in most cases
Stock planning Different outlets for different needs One plate style, multiple module options

Quality Assurance Practices

  • Continuity and wiring scheme verification performed on production samples
  • Insertion force testing to confirm modules seat correctly in standard keystone openings
  • Visual inspection of contact plating and housing molding before packing
  • Batch sampling to confirm consistent color and finish across production runs
Since 2005

Yuyao Simante Network Communication Equipment Co., Ltd.

Yuyao Simante Network Communication Equipment Co., Ltd. offer complete network cabling solutions and optical fiber products integrating design, development, sales and service. The factory has 10 regular and customization production lines, fully automatic injection molding machine 10 sets, semi-automatic injection molding machine 20 units, all kinds of automatic installed machine 8 units, maintaining the stable annual output of more than 9 million.

We specialize in network cabling solutions and optical fiber products integrating design, development, sales and service.
 
Based on the mature research and development system, the quality stability of Simante has been guaranteed at the design source. We have more than 10 engineers and over 30 full-time technical persons who continue to provide their professional value in the position, improving quality and promoting product update. Simante provides specialized integrated solutions for customers to ensure it meets the customer's requirement. Welcome to visit.

17+ Industry Experience
Simante factory
Simante workshop

Our main products include keystone jacks,patch panels, wall face plates, data sockets, etc., and are widely used in structured cabling, network communication, smart home and automation equipment, and other fields. The factory has 10 regular and customization production lines, fully automatic injection molding machine 10 sets, semi-automatic injection molding machine 20 units, all kinds of automatic installed machine 8 units, maintaining the stable annual output of more than 9 million.
 
It is precisely because we are based on the high-end market that Simante has higher requirements for product quality. Not only strictly manage the production, but also meet customers' comprehensive testing requirements for products through good performance testing. We maintain stable export volume in Europe, Australia, Africa, the Middle East and Southeast Asia, and also undertake OEM and ODM projects.
 
Simante, help you create value together!

Work with Loyal

We strive to develop our R&D capabilities and manufacture and provide more cost-effective products to meet your market needs.

  • Product quality assurance

  • Customized solutions

  • Innovative product design

  • Responsible service

Get a Free Quote

Name* Email* Company Your Message*
Recommended Links: Keystone Jacks Keystone Jack OEM Manufacturer RJ45 Keystone Jack Tool-less Keystone Jack Shielded Keystone Jack Unshielded Keystone Jack

Contact Us

*We respect your confidentiality and all information are protected.