Custom

Unshielded Keystone Jack

Steady & Reliable Manufacturer

Overview

An unshielded keystone jack (UTP-style) is the standard, most widely used termination point in commercial and residential structured cabling, relying on twisted-pair geometry rather than metal shielding to manage crosstalk and interference. It is available across every common performance category, including Cat3, Cat5e, Cat6, and Cat6A, and remains the default choice for the vast majority of installations that do not have a specific reason to shield.

Because there is no metal shield shell or grounding requirement, unshielded jacks are simpler and faster to install correctly; a technician only needs to focus on proper termination technique, correct pair untwisting limits, and wiring scheme, without the additional step of bonding a shield to ground. This makes unshielded jacks the more forgiving option for crews with less specialized shielded-cabling experience.

Unshielded jacks use the same universal keystone footprint as shielded versions and terminate through a standard 110-style IDC punch-down block (or a tool-less clamp mechanism, depending on the specific product line), accepting 22-24 AWG solid copper conductors across most categories.

Cost is a major factor in the popularity of unshielded jacks: without the metal shield shell and grounding hardware, per-unit pricing is typically lower than the shielded equivalent, and installation labor is also faster since there is no shield-grounding step to verify.

For the overwhelming majority of office, residential, educational, and retail environments, where electromagnetic interference is not a significant concern, unshielded jacks deliver full certified category performance at a lower installed cost, which is why they remain the default specification in most structured cabling projects worldwide.

Product Catalog

Product Introduction

This unshielded keystone jack delivers full category-rated performance using standard twisted-pair construction, without the added cost and installation complexity of metal shielding. It is available in Cat3, Cat5e, Cat6, and Cat6A performance grades, covering everything from basic voice circuits to certified 10GBASE-T data links.

Internally, the jack uses precision-molded contact geometry to maintain proper pair separation and minimize crosstalk without relying on shielding, meeting TIA/EIA-568-C.2 and ISO/IEC 11801 requirements for its stated category. Contacts are gold-plated phosphor bronze, accepting standard 22-24 AWG solid copper conductors through a 110-style IDC punch-down termination.

The housing is molded from flame-retardant, UV-stable plastic and follows the same universal keystone footprint used across the industry, allowing it to install directly into standard wall plates, surface mount boxes, and patch panels without any special mounting hardware or grounding requirements.

Because there is no shield shell to account for, the jack's overall profile is typically more compact than its shielded equivalent, which can be an advantage in shallow wall plates or high-density patch panel applications where space is at a premium.

Bulk packaging (10, 24, 50, or 100 pieces) is standard, and color options are typically the widest of any keystone jack type, since unshielded jacks are the most commonly used in large color-coded office and campus deployments.

Application Scenarios

Unshielded keystone jacks are the default choice across the vast majority of structured cabling applications where electromagnetic interference is not a significant design concern.

Standard office networks rely on unshielded Cat5e, Cat6, or Cat6A jacks for workstation connections, VoIP phones, and wireless access points, covering the large majority of commercial cabling installed each year worldwide.

Residential and multi-family housing projects almost universally use unshielded jacks, since home and apartment environments rarely have the kind of heavy industrial EMI that would justify the added cost and complexity of shielding.

Educational institutions, from K-12 schools to university campuses, typically standardize on unshielded jacks across classrooms, offices, and common areas, reserving shielded cabling only for specific spaces like server rooms or AV production facilities if needed.

Retail and hospitality environments use unshielded jacks for point-of-sale systems, guest WiFi infrastructure, and back-office networking, where cost efficiency across a large number of ports matters more than EMI resistance beyond what twisted-pair geometry already provides.

General-purpose data centers without unusual EMI sources frequently use unshielded Cat6A for the majority of copper connections, reserving shielded or fiber options only for specific high-density or high-interference zones within the facility.

Small and medium businesses, co-working spaces, and light commercial buildouts overwhelmingly specify unshielded jacks as the practical, cost-effective default, since these environments rarely have electrical interference sources severe enough to justify a shielded cable plant.

Category OptionsUnshielded Cat3, Cat5e, Cat6, and Cat6A available
Standard ComplianceTIA/EIA-568-C.2 / ISO/IEC 11801 (category dependent), RoHS
ShieldingNone (UTP construction, twisted-pair crosstalk management)
Wiring SchemeT568A / T568B, color coded
Conductor Compatibility22-24 AWG solid copper
Contact MaterialPhosphor bronze, gold-plated contact points
Termination Type110-style IDC punch-down (tool-less options available)
Termination Cycles200+ punch-down cycles rated (category dependent)
Housing MaterialFlame-retardant PC/ABS, UL 94V-0
MountingStandard keystone footprint, snap-in
Operating Temperature-10 to 60 C
Available ColorsWhite, Black, Ivory, Blue, Red, Yellow, Gray
PackagingSingle, 10-pack, 24-pack, 50-pack, 100-pack cartons
  • Q: Is an unshielded Cat6A jack still capable of 10G performance?
  • A: Yes. Shielding and category performance are separate specifications. An unshielded Cat6A jack, properly installed with matching Cat6A cable and patch panel, fully supports certified 10GBASE-T performance in a typical low-EMI environment.
  • Q: When should I choose shielded instead of unshielded jacks?
  • A: Choose shielded jacks only when there is a specific, known source of electromagnetic interference nearby, such as heavy industrial equipment, or when a project specification explicitly requires a shielded cable plant. Otherwise, unshielded is the more cost-effective and simpler default.
  • Q: Do unshielded jacks fit the same wall plates as shielded jacks?
  • A: Yes, both use the identical universal keystone footprint, so they are fully interchangeable across wall plates, surface boxes, and patch panels.
  • Q: Why did my unshielded Cat6A link fail certification testing?
  • A: The most common causes are excessive untwisting of pairs at termination, exceeding the maximum bend radius during cable routing, or running cable too close to bundled power lines. These issues are unrelated to the lack of shielding and apply equally to shielded jacks.
  • Q: Are unshielded keystone jacks less durable than shielded ones?
  • A: Not in terms of electrical performance or termination cycle rating; the difference is primarily EMI resistance, not mechanical durability. Both types are typically rated for hundreds of insertion cycles when built to the same category standard.
  • Q: Can I use unshielded jacks in a data center?
  • A: Yes, unshielded Cat6A jacks are widely used in data centers without unusual interference sources, particularly for shorter copper runs like top-of-rack connections and out-of-band management networks.
  • Q: Is unshielded cabling suitable for outdoor or industrial use?
  • A: Standard unshielded keystone jacks are designed for indoor use. For outdoor or heavy industrial environments with significant EMI or environmental exposure, shielded or ruggedized industrial-rated connectors are generally more appropriate.
  • Q: How much cheaper are unshielded jacks compared to shielded jacks?
  • A: Pricing varies by manufacturer and category, but unshielded jacks are typically noticeably less expensive per unit than their shielded equivalents, and installation labor is also faster since there is no shield-grounding step required.
Cat6A Keystone Jack, Cat7 Keystone Jack, CAT3 Keystone Jack, Tool-less Keystone Jack, Shielded Keystone Jack
Since 2005

Yuyao Simante Network Communication Equipment Co., Ltd.

Yuyao Simante Network Communication Equipment Co., Ltd. offer complete network cabling solutions and optical fiber products integrating design, development, sales and service. The factory has 10 regular and customization production lines, fully automatic injection molding machine 10 sets, semi-automatic injection molding machine 20 units, all kinds of automatic installed machine 8 units, maintaining the stable annual output of more than 9 million.

We specialize in network cabling solutions and optical fiber products integrating design, development, sales and service.
 
Based on the mature research and development system, the quality stability of Simante has been guaranteed at the design source. We have more than 10 engineers and over 30 full-time technical persons who continue to provide their professional value in the position, improving quality and promoting product update. Simante provides specialized integrated solutions for customers to ensure it meets the customer's requirement. Welcome to visit.

17+ Industry Experience
Simante factory
Simante workshop

Our main products include keystone jacks,patch panels, wall face plates, data sockets, etc., and are widely used in structured cabling, network communication, smart home and automation equipment, and other fields. The factory has 10 regular and customization production lines, fully automatic injection molding machine 10 sets, semi-automatic injection molding machine 20 units, all kinds of automatic installed machine 8 units, maintaining the stable annual output of more than 9 million.
 
It is precisely because we are based on the high-end market that Simante has higher requirements for product quality. Not only strictly manage the production, but also meet customers' comprehensive testing requirements for products through good performance testing. We maintain stable export volume in Europe, Australia, Africa, the Middle East and Southeast Asia, and also undertake OEM and ODM projects.
 
Simante, help you create value together!

Work with Loyal

We strive to develop our R&D capabilities and manufacture and provide more cost-effective products to meet your market needs.

  • Product quality assurance

  • Customized solutions

  • Innovative product design

  • Responsible service

Get a Free Quote

Name* Email* Company Your Message*
Recommended Links: Keystone Jacks & Modules Keystone Jacks Keystone Jack OEM Manufacturer RJ45 Keystone Jack Tool-less Keystone Jack Shielded Keystone Jack

Contact Us

*We respect your confidentiality and all information are protected.