Custom

Single Port Faceplate

Steady & Reliable Manufacturer

Overview

A single port faceplate is the simplest and most common member of the faceplate family - a compact wall-mounted cover with a single keystone opening, built for locations that need exactly one data, voice, or video connection and nothing more.

It fits a standard single-gang wall box and accepts any standard keystone jack, so the same faceplate works equally well for an RJ45 data drop, a coax connection, an HDMI pass-through, or a fiber keystone module, depending entirely on which jack is snapped into it.

Because it covers only one opening, a single port faceplate is the smallest and least expensive faceplate option, making it the default choice for individual data drops in home offices, single-device workstations, and any wall location that will only ever need one connection.

Like other faceplates in this category, it is molded from flame-retardant PC/ABS plastic, includes a label window for a simple room or port identifier, and installs without tools once the keystone jack is already in hand.

Its compact footprint also makes it a common retrofit option, since a single-gang cutout is the smallest and easiest wall opening to add to an existing finished wall when a new single connection is needed.

Product Catalog

Introduction

The single port faceplate is the most basic and most widely used faceplate configuration: one keystone opening, sized to the standard 14.5mm by 16mm keystone footprint, mounted in a compact single-gang cover plate. Its simplicity is exactly what makes it so common - most individual data or voice drops only ever need one connection, and a single port faceplate is the smallest, most cost-effective way to provide it.

Like every faceplate in this category, it is built from flame-retardant PC/ABS plastic and accepts any standard keystone jack regardless of connector type, so the same physical faceplate can serve as a data outlet, a phone jack, a coax connection, or an HDMI or fiber pass-through, depending entirely on which keystone module is installed.

The plate is sized for a standard single-gang wall box, the most common wall box format for both new construction and retrofit work, and mounts with two screws directly to the box's threaded mounting ears, with the keystone jack then snapping into the faceplate's central opening from behind.

A label window sits above or beside the single port on most models, giving installers a place to mark a room number, jack ID, or simple icon that ties the connection back to its corresponding port on the patch panel - a small detail that matters considerably once a building has dozens or hundreds of these plates installed.

Because it is the smallest cutout size in the faceplate family, the single port faceplate is also a common choice for surface-mount installations, where a small surface-mount box is applied directly to a finished wall without cutting into it - a frequent solution for retrofits, masonry walls, or temporary installations.

Application

Single port faceplates are used anywhere a location needs exactly one wired connection - which covers a very large share of individual data, voice, and video drops across offices, homes, and institutional buildings. They are the default faceplate for a single-purpose connection rather than a multi-device workstation.

In home networks, a single port faceplate is the standard choice for a bedroom, home office, or media device that needs one dedicated Ethernet or coax drop, offering a clean, professional-looking outlet without the extra cost of unused ports.

Small office and retail environments use single port faceplates for individual point-of-sale terminals, printers, or other single-device connections that do not need to share a wall plate with a second port.

Institutional buildings - schools, hospitals, and government facilities - use single port faceplates for auxiliary connections such as a standalone access point, a security camera, or a badge reader, where the location only ever needs one data drop regardless of how many ports exist elsewhere in the room.

Retrofit projects favor single port faceplates specifically because of their small cutout size: adding one new connection to an existing finished wall is far less invasive with a single-gang opening than with a larger multi-port plate, especially when using a surface-mount box that avoids cutting into the wall at all.

Telecom and equipment closets sometimes use single port faceplates on small auxiliary panels as well, providing a single labeled connection point for a specific piece of equipment mounted outside the main patch panel, such as a wall-mounted phone or a dedicated management port.

Specification

Port Configuration1-Port keystone
MaterialFlame-retardant PC/ABS plastic
Size86mm x 86mm / US 1-gang
MountingWall box or surface-mount box
Keystone OpeningStandard 14.5mm x 16mm snap-in
ColorWhite (custom colors available on request)
LabelingID window with icon insert
Fire RatingUL94V-0

Installation, Troubleshooting and FAQ

  • Q: When should I use a single port faceplate instead of a multi-port one?
  • A: Use a single port faceplate whenever a location needs exactly one connection with no realistic near-term need for a second; if a second device is likely to be added later, a 2-port faceplate is usually the more practical choice since it avoids replacing the plate down the line.
  • Q: What size wall box does a single port faceplate need?
  • A: It is sized for a standard single-gang wall box, the most common wall box format used in both new construction and retrofit electrical and low-voltage work.
  • Q: Can I upgrade a single port faceplate to add more ports later?
  • A: Not directly - since the plate has only one keystone opening, adding a second port means replacing the single port faceplate with a 2-port or larger model rather than modifying the existing plate.
  • Q: Is a single port faceplate suitable for a phone line?
  • A: Yes - pairing a single port faceplate with a voice-rated keystone jack is a standard way to provide a dedicated phone connection, and the same faceplate can later be switched to a data jack if the location's use changes.
  • Q: How do I snap a keystone jack into a single port faceplate?
  • A: Align the keystone jack's tabs with the faceplate's opening and press it in from the back until the release clip locks into place; no tools are required, and a properly seated jack will sit flush with the front of the plate.
  • Q: Do single port faceplates come in different colors?
  • A: Yes - white is the most common standard color, with additional colors typically available to match different wall finishes or brand requirements.
  • Q: Can a single port faceplate be surface mounted without a wall box?
  • A: Yes - pairing it with a matching surface-mount box lets it be installed directly onto a finished wall without cutting an in-wall opening, which is common in retrofit or masonry wall situations.
  • Q: What's the standard size of a single port faceplate?
  • A: Most single port faceplates match the standard single-gang wall plate footprint, commonly around 86mm by 86mm, matching the same wall box size used for standard electrical switches and outlets in many markets.
Faceplates, Network Faceplate
Since 2005

Yuyao Simante Network Communication Equipment Co., Ltd.

Yuyao Simante Network Communication Equipment Co., Ltd. offer complete network cabling solutions and optical fiber products integrating design, development, sales and service. The factory has 10 regular and customization production lines, fully automatic injection molding machine 10 sets, semi-automatic injection molding machine 20 units, all kinds of automatic installed machine 8 units, maintaining the stable annual output of more than 9 million.

We specialize in network cabling solutions and optical fiber products integrating design, development, sales and service.
 
Based on the mature research and development system, the quality stability of Simante has been guaranteed at the design source. We have more than 10 engineers and over 30 full-time technical persons who continue to provide their professional value in the position, improving quality and promoting product update. Simante provides specialized integrated solutions for customers to ensure it meets the customer's requirement. Welcome to visit.

17+ Industry Experience
Simante factory
Simante workshop

Our main products include keystone jacks,patch panels, wall face plates, data sockets, etc., and are widely used in structured cabling, network communication, smart home and automation equipment, and other fields. The factory has 10 regular and customization production lines, fully automatic injection molding machine 10 sets, semi-automatic injection molding machine 20 units, all kinds of automatic installed machine 8 units, maintaining the stable annual output of more than 9 million.
 
It is precisely because we are based on the high-end market that Simante has higher requirements for product quality. Not only strictly manage the production, but also meet customers' comprehensive testing requirements for products through good performance testing. We maintain stable export volume in Europe, Australia, Africa, the Middle East and Southeast Asia, and also undertake OEM and ODM projects.
 
Simante, help you create value together!

Work with Loyal

We strive to develop our R&D capabilities and manufacture and provide more cost-effective products to meet your market needs.

  • Product quality assurance

  • Customized solutions

  • Innovative product design

  • Responsible service

Get a Free Quote

Name* Email* Company Your Message*
Recommended Links: Faceplates Dual Port Faceplate Faceplate ODM Manufacturer 24 Port Patch Panel 48 Port Patch Panel Network Faceplate UK Type Faceplate

Contact Us

*We respect your confidentiality and all information are protected.