Custom

UK Type Faceplate

Steady & Reliable Manufacturer

Overview

A UK type faceplate is a wall plate built to British and European dimensional conventions — typically an 86 × 86 mm single-gang or 146 × 86 mm double-gang frame — that accepts snap-in Euro-module data or AV inserts sized 25 × 50 mm. It's the standard outlet format for UK, Irish, and much of European commercial and residential cabling, and it's built to match the switch and socket plate ranges electricians already install for power, so a data outlet can sit visually alongside light switches and mains sockets without looking out of place. UK type faceplates are supplied in flush and surface-mount versions, in a wide range of finishes, and are specified on nearly every UK office fit-out, new-build home, and hotel project that needs a low-profile, code-compliant network outlet.

Product Catalog

Introduction

The defining feature of the UK type faceplate is the Euro-module system: rather than a US-style keystone cutout, the plate carries one or more 25 × 50 mm module slots, each of which accepts a snap-in RJ45 Euromodule jack, an F-connector for coax, an HDMI or USB module, or a blank. A single-gang plate typically holds one or two modules; a double-gang plate holds up to four, which is why UK type faceplates are common in rooms that combine data, TV, and AV outlets on one wall plate.

Frame depth matters more in UK installs than in US ones, because UK wiring regulations and standard back-box depths (25 mm, 35 mm, or 47 mm) constrain how much cable slack and how many modules can sit behind the plate. Screwless, click-fit frames have become popular for a cleaner look in modern offices and premium residential fit-outs, alongside the traditional screw-fixed versions used in most commercial installs.

Applications

UK type faceplates are specified wherever a project follows British or European wiring conventions and needs the outlet to visually match existing power and lighting accessories:

  • UK and Irish office fit-outs matching an existing switch-plate range
  • New-build and renovated residential properties across the UK and Europe
  • Hotel rooms combining data, TV coax, and AV modules on one plate
  • Retail and hospitality projects specifying a coordinated accessory finish
  • Commercial buildings following BS/EN wiring regulations for outlet installation

Specifications

Module typeEuro-module snap-in, 25 × 50 mm
Frame sizesSingle-gang (86 × 86 mm) up to 6-gang architrave
Modules per gang1–2 (single-gang), up to 4 (double-gang)
MaterialFlame-retardant PC/ABS or polycarbonate
Finish optionsWhite, black, brushed steel, aluminium; screwless or screw-fixed
MountingFlush wall box (25/35/47 mm depth) or surface pattress
Fire ratingFlame-retardant, self-extinguishing
ComplianceBuilt to UK/European wiring regulation and dimensional conventions

Installation Tips

Fit the back box to the correct depth for the number of modules planned, since shallow boxes make dressing cable behind multiple modules difficult. Terminate each Euromodule jack before snapping it into the frame, and keep enough slack in the box for future re-termination without pulling cable from the wall.

Troubleshooting & FAQ

A module that won't click fully into the frame is almost always a depth or slack problem in the back box rather than a faulty module — check that cable bulk isn't pushing the module forward before assuming it's defective.

  • Q: What is the standard UK type faceplate module size?
  • A: UK type faceplates use the Euro-module standard of 25 × 50 mm per snap-in insert, which is shared across most European data, coax, and AV modules.
  • Q: Can UK type modules fit US-style wall boxes?
  • A: No. UK type plates are sized to UK/European wall boxes and fixing centers, which differ from US single-gang boxes, so the two systems are not interchangeable.
  • Q: How many modules fit on a single-gang UK plate?
  • A: Typically one or two Euro-modules, depending on the frame design; double-gang and larger architrave plates hold up to four.
  • Q: Is a UK type faceplate the same as a keystone faceplate?
  • A: No. Keystone is the US-style cutout used with keystone jacks; UK type faceplates use the Euro-module system, which is a different snap-in format entirely.
  • Q: What back-box depth do I need behind a UK type faceplate?
  • A: A 25 mm box suits a single module with light cable slack; 35 mm or 47 mm boxes are recommended when fitting multiple modules or thicker shielded cable.
  • Q: Can I mix data and coax modules on the same UK type plate?
  • A: Yes — that's one of the main advantages of the Euro-module system, since data, coax, and AV modules share the same footprint and can sit on the same frame.
  • Q: Are screwless UK type faceplates as secure as screw-fixed ones?
  • A: Properly fitted screwless click-fit frames hold securely for normal use; screw-fixed frames are generally preferred in high-traffic commercial areas subject to more physical contact.
  • Q: Do UK type faceplates support Cat6A shielded cabling?
  • A: Yes, provided the module itself is a shielded Cat6A Euromodule jack — the plate is passive and simply carries whatever module is fitted.
Dual Port Faceplate, Data Sockets, Structured Cabling System, Residential Cabling, Office Network Cabling
Since 2005

Yuyao Simante Network Communication Equipment Co., Ltd.

Yuyao Simante Network Communication Equipment Co., Ltd. offer complete network cabling solutions and optical fiber products integrating design, development, sales and service. The factory has 10 regular and customization production lines, fully automatic injection molding machine 10 sets, semi-automatic injection molding machine 20 units, all kinds of automatic installed machine 8 units, maintaining the stable annual output of more than 9 million.

We specialize in network cabling solutions and optical fiber products integrating design, development, sales and service.
 
Based on the mature research and development system, the quality stability of Simante has been guaranteed at the design source. We have more than 10 engineers and over 30 full-time technical persons who continue to provide their professional value in the position, improving quality and promoting product update. Simante provides specialized integrated solutions for customers to ensure it meets the customer's requirement. Welcome to visit.

17+ Industry Experience
Simante factory
Simante workshop

Our main products include keystone jacks,patch panels, wall face plates, data sockets, etc., and are widely used in structured cabling, network communication, smart home and automation equipment, and other fields. The factory has 10 regular and customization production lines, fully automatic injection molding machine 10 sets, semi-automatic injection molding machine 20 units, all kinds of automatic installed machine 8 units, maintaining the stable annual output of more than 9 million.
 
It is precisely because we are based on the high-end market that Simante has higher requirements for product quality. Not only strictly manage the production, but also meet customers' comprehensive testing requirements for products through good performance testing. We maintain stable export volume in Europe, Australia, Africa, the Middle East and Southeast Asia, and also undertake OEM and ODM projects.
 
Simante, help you create value together!

Work with Loyal

We strive to develop our R&D capabilities and manufacture and provide more cost-effective products to meet your market needs.

  • Product quality assurance

  • Customized solutions

  • Innovative product design

  • Responsible service

Get a Free Quote

Name* Email* Company Your Message*
Recommended Links: Faceplates Faceplate ODM Manufacturer Network Faceplate Single Port Faceplate Dual Port Faceplate

Contact Us

*We respect your confidentiality and all information are protected.