Custom

Male Connector Supplier

Steady & Reliable Manufacturer

What a Male Connector Is and Who Buys It

A male connector — commonly called a field termination plug or RJ45 plug — is the modular connector crimped or toolless-terminated directly onto the end of a patch cord or field cable, carrying the same 8P8C (or 6P4C for voice) interface a keystone jack's port is built to receive. Where a keystone jack belongs to the permanent, in-wall side of a cabling system, a male connector belongs to the field or patch-cord side: it is what a technician terminates on-site when building a custom-length patch cord, or what a cable assembly manufacturer crimps onto bulk cable before it ships as a finished cord. Getting the category, shielding, and termination style right on a male connector matters just as much as it does on a jack, since the finished link is only as good as its weakest connector.

Simante's male connector range spans Cat3 (RJ11 6P4C) through Cat6A and Cat7/Cat8, in both toolless field-termination plug and traditional two-piece plug with strain-relief boot formats, in UTP and FTP (360° shielded) construction. Buyers searching for a Male Connector Supplier are typically cable assembly manufacturers and patch-cord producers who need a reliable bulk connector source, importers and brand owners building their own private-labeled termination tool kit, distributors stocking connectors alongside patch cords and tools for installer customers, and field technicians' employers (system integrators, telecom contractors) who need toolless connectors that reduce on-site termination time and error rate.

Product Catalog

Core Specification

Male connector specification centers on category, shielding, plug mechanism (toolless vs. traditional crimp), and contact plating, since these determine both electrical performance and how fast a technician can terminate the connector in the field. The table below reflects Simante's current range across Cat3, Cat5E, Cat6, Cat6A, and Cat7/Cat8 male connectors.

Toolless field-termination plugs are increasingly specified on projects where termination speed and consistency matter more than the lower per-unit cost of a traditional crimp plug, since they remove crimp-tool quality as a variable in the finished link's performance.

ParameterDetail
Category optionsCAT3 (RJ11 6P4C), CAT5E, CAT6, CAT6A, CAT7/CAT8
Plug mechanismToolless field-termination plug; traditional two-piece crimp plug with strain-relief boot
ShieldingUTP (unshielded) and FTP (360° shielded shell) construction
Contact materialBrass gold-plated contact needles; gold plating thickness 3–50 µ"
IDC terminal materialPhosphor bronze, nickel-plated
Bracket materialCold-rolled steel bracket with plastic spray coating (shielded models)
Housing materialPC and PBT plastic housing; PCB substrate FR4 (where applicable)
Wire compatibilityIDC clamps 23–26 AWG twisted-pair conductor; Krone-tool-compatible IDC wiring on select models
Performance referenceElectrical performance tested against TIA/EIA-568-C.2 category limits

Application Scenarios and Target Customers

Male connectors sold under this tag serve two main production paths: bulk supply to patch-cord and cable-assembly manufacturers who crimp or terminate them onto cable in volume, and field-termination stock for system integrators and telecom contractors who need connectors their own technicians can terminate on-site, often with the toolless variant to cut termination time. Category selection follows the same logic as the rest of the copper system range — Cat3 for voice, Cat5e/Cat6 for standard data, Cat6A/Cat7 for higher-bandwidth or shielded applications.

The table below sets out which buyer type this page is written for and what each typically needs from a male connector supplier, separate from the connector spec itself.

Customer TypeWhat They Typically Need
Cable assembly / patch-cord manufacturersReliable bulk supply with consistent crimp/termination performance across large production runs
Importers & brand ownersPrivate-labeled connector packaging for resale through their own installer and distributor network
Regional distributorsA full category and shielding range kept in stock alongside patch cords, tools, and keystone jacks
System integrators / telecom contractorsToolless field-termination plugs that reduce on-site termination time and technician error rate
E-commerce sellersSmall-pack retail packaging suited to individual or box-of-N resale
Project contractorsCategory and shielding matched to the project's cabling schedule, ordered in bulk-crimp-ready packaging

OEM/ODM Customization Capability

Male connector customization under Simante's OEM/ODM service follows the standard company workflow — design draft or sample review, 3D drawing confirmation, quotation, tooling if a new housing shape is required, sample sign-off, and mass production with ERP-tracked status. For a small, high-volume component like a male connector, customization is concentrated in packaging, branding, and category/shielding selection, since the 8P8C or 6P4C interface dimension itself is fixed by the standard it plugs into.

The table below separates what is normally available from existing tooling from what would require new mold development, which applies mainly to a non-standard housing or boot shape.

Customization ItemWhat Can Be Adjusted
Logo markingPad printing, laser etching, or label on the connector housing or packaging
Category & shieldingCAT3 / CAT5E / CAT6 / CAT6A / CAT7-CAT8, UTP or FTP
Plug mechanismToolless field-termination plug or traditional two-piece crimp plug
Boot / strain reliefStandard or custom-color strain-relief boot, by model
Contact platingGold plating thickness selectable within the 3–50 µ" range, subject to batch size
Packaging & labelingCustom-printed bulk box, bag, barcode/label, and multilingual instruction sheet
New housing mold developmentNon-standard housing or boot shape built from the customer's drawing or sample; quoted separately with its own lead time

Production Capacity and Lead Time

Simante was established in 2005 and operates two manufacturing plants totaling more than 9,000 square meters, with over 50 precision production units and supported by 10+ engineers, 30+ full-time technical staff, and an in-house testing laboratory. Company-wide annual output exceeds 9 million units per year, exported to 45+ countries and regions across Europe, Australia, Africa, the Middle East, and Southeast Asia.

These are company-wide figures and a useful reference for order-size capacity, particularly relevant for cable-assembly manufacturers evaluating whether Simante can support a recurring bulk-connector order. Standard lead time, peak-season lead time, and MOQ for a specific male connector SKU depend on category, shielding, and plating specification, and should be confirmed directly with Simante's sales team.

ItemDetail
Established2005 — 20+ years in network cabling and fiber optic component manufacturing
Facility9,000 m²+ total factory area across two manufacturing plants
Equipment50+ precision production units, incl. automatic and semi-automatic injection molding and installation machines
Technical team10+ engineers, 30+ full-time technical staff, in-house testing laboratory
Annual output9 million+ units per year across the product range
Export footprint45+ countries and regions across Europe, Australia, Africa, the Middle East, and Southeast Asia
Standard lead timeConfirm with Simante sales — quoted per category, shielding, and plating spec
Peak-season lead timeConfirm with Simante sales — typically longer during seasonal peak periods
MOQConfirm with Simante sales — varies by SKU and customization scope, often lower for a standard bulk connector than for a fully custom housing

Packaging and Logistics

Simante's factory sits in Yuyao, Ningbo City, Zhejiang Province, roughly 50 km from Ningbo-Zhoushan Port, keeping sea-freight handling straightforward for both standard and OEM-packaged connector orders. Male connectors are typically bulk-packed by the hundred or thousand into poly bags and bulk cartons given their small size and high per-carton unit count, which is efficient for cable-assembly manufacturers; retail-count packaging is available for distributor and e-commerce orders under OEM/ODM.

Exact carton dimensions, units per carton, and container loading counts vary by category and packaging format (bulk vs. retail), so these are confirmed as part of the formal quotation. The fields below describe the categories of information Simante provides at that stage rather than fixed figures.

ItemDetail
Nearest portApprox. 50 km from Ningbo-Zhoushan Port
Standard export packagingBulk poly bag and carton packaging; retail-count box packaging available under OEM/ODM
Carton specificationConfirmed per SKU — varies by category and bulk/retail packaging choice
Units per cartonConfirmed per SKU at quotation stage — bulk cartons commonly hold several hundred to a few thousand pieces
Container loading (20GP/40HQ)Provided with the formal quotation once carton specification is set
Common trade termsFOB Ningbo, CIF, and EXW commonly used; other Incoterms negotiable
Shipping modesSea freight for bulk/project orders; air or express courier for samples and urgent restocks
Since 2005

Yuyao Simante Network Communication Equipment Co., Ltd.

Yuyao Simante Network Communication Equipment Co., Ltd. offer complete network cabling solutions and optical fiber products integrating design, development, sales and service. The factory has 10 regular and customization production lines, fully automatic injection molding machine 10 sets, semi-automatic injection molding machine 20 units, all kinds of automatic installed machine 8 units, maintaining the stable annual output of more than 9 million.

We specialize in network cabling solutions and optical fiber products integrating design, development, sales and service.
 
Based on the mature research and development system, the quality stability of Simante has been guaranteed at the design source. We have more than 10 engineers and over 30 full-time technical persons who continue to provide their professional value in the position, improving quality and promoting product update. Simante provides specialized integrated solutions for customers to ensure it meets the customer's requirement. Welcome to visit.

17+ Industry Experience
Simante factory
Simante workshop

Our main products include keystone jacks,patch panels, wall face plates, data sockets, etc., and are widely used in structured cabling, network communication, smart home and automation equipment, and other fields. The factory has 10 regular and customization production lines, fully automatic injection molding machine 10 sets, semi-automatic injection molding machine 20 units, all kinds of automatic installed machine 8 units, maintaining the stable annual output of more than 9 million.
 
It is precisely because we are based on the high-end market that Simante has higher requirements for product quality. Not only strictly manage the production, but also meet customers' comprehensive testing requirements for products through good performance testing. We maintain stable export volume in Europe, Australia, Africa, the Middle East and Southeast Asia, and also undertake OEM and ODM projects.
 
Simante, help you create value together!

Work with Loyal

We strive to develop our R&D capabilities and manufacture and provide more cost-effective products to meet your market needs.

  • Product quality assurance

  • Customized solutions

  • Innovative product design

  • Responsible service

Get a Free Quote

Name* Email* Company Your Message*
Recommended Links: RJ45 Male Connector RJ45 Connectors Patch Panel OEM Supplier Surface Mount Box Supplier Network Tools Series Supplier

Contact Us

*We respect your confidentiality and all information are protected.