Custom

Cable Manager Factory

Steady & Reliable Manufacturer

What a Cable Manager Is and Who Buys It

A cable manager is the rack-mounted accessory that keeps patch cords routed, separated, and accessible instead of bundled into a tangled mass in front of a patch panel or switch. Built as a horizontal bar of rings, D-rings, or a brush-covered slot, it mounts directly into the rack's standard 19-inch rail spacing above or below the active equipment it serves. The difference between a tidy rack and one that takes twenty minutes to trace a single cable usually comes down to whether cable managers were specified and installed in the first place — they don't carry signal, but they directly affect how fast a technician can service a rack later.

Simante produces cable managers in 1U and 2U heights, with ring counts from 5 to 24, in both metal and plastic construction, including a dust-proof brush variant for cabinets where airflow or dust control matters. Buyers reaching this page as a Cable Manager Factory search typically split into distributors stocking a full rack-accessory range alongside patch panels and keystone jacks, data center or system integrators ordering by the rack elevation and needing matched ring counts across many racks, and importers or brand owners who want their own part numbers on a basic but frequently reordered accessory line. As with the rest of Simante's copper system range, the company has produced structured cabling components since 2005 and ships to 45+ countries, which is the track record most of these buyers check before committing to a repeat-order relationship.

Product Catalog

Core Specification

Cable manager specification is simpler than an active or terminated component, but still varies meaningfully by rack height, ring/finger count, and whether the body is metal or plastic — metal units generally hold up better under heavier cable loads, while plastic units are lighter and lower cost for smaller racks. The table below reflects the range Simante currently produces across its 1U/2U, 5-to-24-ring, metal and plastic cable manager models.

Brush-covered variants are specified specifically where airflow management or dust ingress matters more than maximum ring capacity, and are commonly paired with a standard ring-type manager one rack unit away.

ParameterDetail
Rack height1U and 2U formats
Ring / finger count5, 10, 12, and 24-ring options
Body materialMetal (steel) and plastic (PC/ABS) construction, by model
MountingStandard 19-inch rack-mount, front panel screw mount
Special variantsDust-proof brush cable organizer; D-ring plastic manager
FinishBlack standard finish; custom color on request
Cable capacityScales with ring/finger count and body width — confirmed per model at quotation
Compliance referenceRoHS-compliant materials; structural design aligned to standard 19-inch rack specifications

Application Scenarios and Target Customers

Cable managers are specified anywhere patch cords need to be kept organized above or below active equipment: data center and server room racks, office telecom room cabinets, and any installation where cable managers are bundled into the same rack elevation as Simante's own patch panels. Metal units are more common in higher-density data center racks carrying heavier cable loads, while plastic and brush-covered units are typical in smaller office cabinets or where airflow/dust control is the priority.

The table below sets out which buyer type this page is written for and what each typically needs from a cable manager factory, as distinct from the hardware spec itself.

Customer TypeWhat They Typically Need
Importers & brand ownersPrivate-labeled packaging on a simple but frequently reordered accessory, consistent ring strength across batches
Regional distributorsA full 1U/2U, metal/plastic range kept in stock alongside patch panels for one-stop rack-accessory ordering
Data center / system integratorsMatched ring counts and finish across many racks in one project, ordered against the rack elevation drawing
Hotel & project contractorsBulk packaging and straightforward 19-inch mounting matched to the project's rack schedule
E-commerce sellersSmall-box retail packaging suited to individual unit resale
Chain retailers / brand ownersThe same finish and ring count repeated reliably across many store or site rollouts

OEM/ODM Customization Capability

Cable manager customization follows Simante's standard OEM/ODM workflow: a design draft or sample is reviewed, a 3D drawing is confirmed, the project is quoted, tooling is built if needed, a sample is produced for sign-off, and mass production follows with ERP-tracked order status. For a cable manager, most customization requests concern finish color, ring/finger count selection, body material, and packaging/branding rather than a wholly new mechanical shape, since the 19-inch rack-mount interface itself is an industry-standard dimension.

The table below separates what is normally available from existing tooling versus what requires new mold development, which is quoted and scheduled as a separate tooling project once a drawing or sample is reviewed.

Customization ItemWhat Can Be Adjusted
Logo markingPad printing, laser etching, or label on the front panel
Finish colorStandard black; custom color on request, subject to batch size
Body materialMetal (steel) or plastic (PC/ABS) construction, selected per SKU
Ring / finger count5, 10, 12, or 24-ring configuration, or a dust-proof brush variant
Rack height1U or 2U, selected per project's rack elevation
Packaging & labelingCustom-printed carton, barcode/label, and multilingual instruction sheet
New mold developmentCustom bracket or ring/finger shape built from the customer's drawing or sample; quoted separately with its own lead time

Production Capacity and Lead Time

Simante was established in 2005 and operates two manufacturing plants totaling more than 9,000 square meters, equipped with over 50 precision production units and supported by 10+ engineers and 30+ full-time technical staff. Company-wide annual output exceeds 9 million units per year, shipped to 45+ countries and regions across Europe, Australia, Africa, the Middle East, and Southeast Asia.

These are company-wide figures and a useful reference for order-size capacity. Standard lead time, peak-season lead time, and MOQ for a specific cable manager SKU depend on ring count, material, and finish, and should be confirmed directly with Simante's sales team.

ItemDetail
Established2005 — 20+ years in network cabling and fiber optic component manufacturing
Facility9,000 m²+ total factory area across two manufacturing plants
Equipment50+ precision production units, incl. automatic and semi-automatic injection molding machines
Technical team10+ engineers, 30+ full-time technical staff, in-house testing laboratory
Annual output9 million+ units per year across the product range
Export footprint45+ countries and regions across Europe, Australia, Africa, the Middle East, and Southeast Asia
Standard lead timeConfirm with Simante sales — quoted per ring count, material, and finish
Peak-season lead timeConfirm with Simante sales — typically longer during seasonal peak periods
MOQConfirm with Simante sales — varies by SKU and customization scope

Packaging and Logistics

Simante's factory sits in Yuyao, Ningbo City, Zhejiang Province, roughly 50 km from Ningbo-Zhoushan Port, keeping sea-freight handling straightforward for both standard and OEM-packaged accessory orders. Cable managers are typically bulk-packed into export cartons given their lower per-unit value relative to a panel or active component; under OEM/ODM service, carton printing and included labeling can be customized to the buyer's brand.

Exact carton dimensions, units per carton, and container loading counts vary with ring count and body material (metal units are heavier per carton than plastic), so these are confirmed as part of the formal quotation. The fields below describe the categories of information Simante provides at that stage rather than fixed figures.

ItemDetail
Nearest portApprox. 50 km from Ningbo-Zhoushan Port
Standard export packagingBulk-packed into export cartons; custom carton printing available under OEM/ODM
Carton specificationConfirmed per SKU — varies by ring count and metal/plastic construction
Units per cartonConfirmed per SKU at quotation stage
Container loading (20GP/40HQ)Provided with the formal quotation once carton specification is set
Common trade termsFOB Ningbo, CIF, and EXW commonly used; other Incoterms negotiable
Shipping modesSea freight for bulk/project orders; air or express courier for samples and urgent restocks
Since 2005

Yuyao Simante Network Communication Equipment Co., Ltd.

Yuyao Simante Network Communication Equipment Co., Ltd. offer complete network cabling solutions and optical fiber products integrating design, development, sales and service. The factory has 10 regular and customization production lines, fully automatic injection molding machine 10 sets, semi-automatic injection molding machine 20 units, all kinds of automatic installed machine 8 units, maintaining the stable annual output of more than 9 million.

We specialize in network cabling solutions and optical fiber products integrating design, development, sales and service.
 
Based on the mature research and development system, the quality stability of Simante has been guaranteed at the design source. We have more than 10 engineers and over 30 full-time technical persons who continue to provide their professional value in the position, improving quality and promoting product update. Simante provides specialized integrated solutions for customers to ensure it meets the customer's requirement. Welcome to visit.

17+ Industry Experience
Simante factory
Simante workshop

Our main products include keystone jacks,patch panels, wall face plates, data sockets, etc., and are widely used in structured cabling, network communication, smart home and automation equipment, and other fields. The factory has 10 regular and customization production lines, fully automatic injection molding machine 10 sets, semi-automatic injection molding machine 20 units, all kinds of automatic installed machine 8 units, maintaining the stable annual output of more than 9 million.
 
It is precisely because we are based on the high-end market that Simante has higher requirements for product quality. Not only strictly manage the production, but also meet customers' comprehensive testing requirements for products through good performance testing. We maintain stable export volume in Europe, Australia, Africa, the Middle East and Southeast Asia, and also undertake OEM and ODM projects.
 
Simante, help you create value together!

Work with Loyal

We strive to develop our R&D capabilities and manufacture and provide more cost-effective products to meet your market needs.

  • Product quality assurance

  • Customized solutions

  • Innovative product design

  • Responsible service

Get a Free Quote

Name* Email* Company Your Message*
Recommended Links: Ethernet Cables Bulk Network Cable Management Cat5e Ethernet Cables Patch Cord OEM Factory

Contact Us

*We respect your confidentiality and all information are protected.