We specialize in network cabling solutions and optical fiber products integrating design, development, sales and service.
Based on the mature research and development system, the quality stability of Simante has been guaranteed at the design source. We have more than 10 engineers and over 30 full-time technical persons who continue to provide their professional value in the position, improving quality and promoting product update.
Simante provides specialized integrated solutions for customers to ensure it meets the customer's requirement. Welcome to visit.
Core Specification
A 110 wiring block's specification centers on pair count, IDC contact material, and the electrical and mechanical test data that confirm it holds up under repeated termination. The table below is drawn directly from Simante's current 110 wiring block range — the 50-pair with legs, 50-pair without legs, 100-pair, and 200-pair models — and from the block's published electrical and environmental test data.
The withstand-voltage, insulation-resistance, and salt-spray figures below are not typical marketing claims; they come from Simante's own published test data sheet for this product line and are a useful reference point when comparing against another supplier's 110 block.
| Parameter | Detail |
| Pair count options | 50-pair (with or without mounting legs), 100-pair, 200-pair |
| Termination type | Enhanced 110 IDC (insulation displacement connector) |
| IDC terminal material | Nickel-plated phosphor bronze |
| Housing material | Polycarbonate (PC) |
| Wire compatibility | 23–26 AWG twisted-pair conductor |
| Withstand voltage | DC 1000V (AC 750V) for 1 minute |
| Insulation resistance | ≥1000 MΩ initial |
| Termination durability | Rated for 250 wire terminations |
| Operating / storage conditions | Operating -25°C to +70°C, ≤85% humidity; storage -5°C to +30°C, ≤70% humidity, 3-year storage period |
| Standards reference | TIA/EIA/ISO general reference; YD/T 926.1-2009 and YD/T 926.3-2009; RoHS compliant; 24-hour salt-spray tested (5% NaCl) |
Application Scenarios and Target Customers
110 wiring blocks are specified wherever a project needs a dense, tool-terminated voice or low-speed data cross-connect: MDF/IDF telecom rooms, PBX and analog phone distribution in hotel and apartment risers, retrofit projects on buildings that already use 110-style blocks, and alarm, intercom, or building-management wiring cross-connects. The 50-pair-with-legs version is typically chosen where the block mounts directly to a wall without a separate backboard bracket, while 100 and 200-pair versions suit higher-density risers.
The table below sets out which buyer type this page is written for and what each typically needs from a 110 wiring block manufacturer, separate from the product's own spec.
| Customer Type | What They Typically Need |
| Importers & distributors | A full 50/100/200-pair range kept in stock to serve telecom contractors and MDF/IDF installers on short notice |
| Hotel & project contractors | Pair count matched to the riser or cross-connect schedule, with legs or backboard mounting as the project requires |
| Telecom / PBX system installers | Reliable IDC termination that tolerates repeated re-punching during moves, adds, and changes |
| Brand owners | Private-labeled packaging on a steadily reordered structured-cabling staple |
| System integrators | A 110 cross-connect field used as backup or overflow termination alongside a newer patch-panel build-out |
| E-commerce / wholesale sellers | Small-box packaging (10/20-per-box format) suited to individual contractor-pack resale |
OEM/ODM Customization Capability
110 wiring block customization under Simante's OEM/ODM service follows the company's standard workflow — design draft or sample review, 3D drawing confirmation, quotation, tooling if required, sample sign-off, and mass production with ERP-tracked status. Because the 110 block's core function and IDC termination dimension are defined by the TIA and YD/T standards it is built to, customization here is concentrated in pair-count packaging, labeling, and leg/mounting configuration rather than a new core mechanical design.
The table below separates what is normally available on existing tooling from what would require new mold development, which applies mainly to a non-standard mounting bracket or a pair-count configuration outside the current 50/100/200-pair range.
| Customization Item | What Can Be Adjusted |
| Logo / label marking | Custom label or printed marking on the block housing or packaging |
| Pair count | 50, 100, or 200-pair on existing tooling |
| Mounting configuration | With mounting legs (direct wall mount) or without legs (backboard bracket mount) |
| Packaging format | Blister bag inside cardboard carton; packing counts of 10 or 20 per box, or bulk carton |
| Packaging & labeling | Custom-printed carton, barcode/label, and multilingual instruction sheet |
| New mold / bracket development | Non-standard mounting bracket or a pair-count configuration outside the current range; quoted separately with its own lead time |
Production Capacity and Lead Time
Simante was established in 2005 and operates two manufacturing plants totaling more than 9,000 square meters, with over 50 precision production units and supported by 10+ engineers, 30+ full-time technical staff, and an in-house testing laboratory capable of running the withstand-voltage, insulation-resistance, and salt-spray tests referenced in this block's own spec sheet. Company-wide annual output exceeds 9 million units per year, exported to 45+ countries and regions across Europe, Australia, Africa, the Middle East, and Southeast Asia.
These are company-wide figures and a useful reference for order-size capacity. Standard lead time, peak-season lead time, and MOQ for a specific 110 wiring block SKU depend on pair count and mounting configuration, and should be confirmed directly with Simante's sales team.
| Item | Detail |
| Established | 2005 — 20+ years in network cabling and fiber optic component manufacturing |
| Facility | 9,000 m²+ total factory area across two manufacturing plants |
| Equipment | 50+ precision production units, incl. automatic and semi-automatic injection molding machines |
| Technical team | 10+ engineers, 30+ full-time technical staff, in-house testing laboratory |
| Annual output | 9 million+ units per year across the product range |
| Export footprint | 45+ countries and regions across Europe, Australia, Africa, the Middle East, and Southeast Asia |
| Standard lead time | Confirm with Simante sales — quoted per pair count and mounting configuration |
| Peak-season lead time | Confirm with Simante sales — typically longer during seasonal peak periods |
| MOQ | Confirm with Simante sales — varies by pair count and packaging format |
Packaging and Logistics
Simante's factory sits in Yuyao, Ningbo City, Zhejiang Province, roughly 50 km from Ningbo-Zhoushan Port, keeping sea-freight handling straightforward for both standard and OEM-packaged orders. The 110 wiring block's standard packaging is a blister bag inside a cardboard carton, with packing counts of 10 or 20 per box depending on pair count and model; under OEM/ODM service, carton printing and included labeling can be customized to the buyer's brand.
Exact carton dimensions, units per carton, and container loading counts vary by pair count (50/100/200-pair) and whether the block includes mounting legs, so these are confirmed as part of the formal quotation. The fields below describe the categories of information Simante provides at that stage rather than fixed figures.
| Item | Detail |
| Nearest port | Approx. 50 km from Ningbo-Zhoushan Port |
| Standard export packaging | Blister bag inside a cardboard carton; custom carton printing available under OEM/ODM |
| Standard packing counts | 10 or 20 pieces per box, by model (per the product's own published packaging data) |
| Carton specification | Confirmed per SKU — varies by pair count and mounting configuration |
| Container loading (20GP/40HQ) | Provided with the formal quotation once carton specification is set |
| Common trade terms | FOB Ningbo, CIF, and EXW commonly used; other Incoterms negotiable |
| Shipping modes | Sea freight for bulk/project orders; air or express courier for samples and urgent restocks |
Español
عربى
русский










